MANIPULATOR ERGOLIFT MB
- FOR ECCENTRIC LOADS
Ergolift offers a hydraulic manipulator where the arm system is flexible both horizontally and vertically. Model MB is used and controlled in the same way as MA, and gripping tools are attached in the same way. MB is also suitable for low ceiling heights. The outer arm can be custom built, which makes adaptation to specific requirements easy. MB can also handle a high bending moment in the tool attachment, and can therefore be used for high eccentric loads. It is also possible to reach into or under obstacles with an MB.
The standard sizes for MB are shown below. We also make more powerful machines for loads up to 500 kg.
Like other ERGOLIFT products, MB can be mounted on a floor pillar, hanging from a fixed ceiling position or from a trolley system
- Endless rotation around theta axis
- EX-classed motor for the hydraulic system, for explosion sensitive areas
Rotation of arm around pillar , theta axis
Rotation around tool attachent, alpha axis
Compressed air supply
6-10 bar (87-145 psi)
230/400V, 50/60 Hz
Max lifting capacity kg
Max eccentric load, Nm
Ergolift is designed to manage loads where the center of gravity is off center. The load can therefore be held and moved some way away from the tool attachment (see image).
Since the Ergolift can reach into and under structures, it can be used for many applications that are too difficult for regular lifting tools, such as handling work pieces in
- Milling machines
- Paint boxes
- Conveyor systems
An operator with an Ergolift can manipulate and balance large loads such as doors, wall elements, axles, pipes etc that used to take at least two people. PLUS he does it faster and safer than before.