A new balancer from Ergolift
Ergobalancer® is a brand new balancer manipulator from Ergolift®. Like most manipulators it is designed to deal with off center loads, like when placing a heavy load into an oven or a machine tool.
Loads can easily be turned or tilted. All kinds of loads can be handled using a gripper, vacuum cup, magnet or other holding device. Installation takes just a few hours.
The unique balancing system lets heavy loads be moved with one hand, making working feel almost like dancing.
ERGOBALANCER®
Everything you need is included
Ergobalancer® is delivered ready to install. All that is needed is power and compressed air.
Reaches into covered or tight spaces
Klicka på bilden för att förstora den
Technical data
Ergobalancer® BB50
Lifts: Up to 50 kg including tool
Reach radius 2,8 meter
Lifting range 1,5 meter
Moment at tool attachment 500 Nm
Can be equipped with: Gripper, magnet, vacuum cups or special tooling
Power required: 230 V
Air required: 6 bar
Ergobalancer® BB90
Lifts: Up to 90 kg including tool
Reach radius 2,8 meter
Lifting range 1,5 meter
Moment at tool attachment 800 Nm
Can be equipped with: Gripper, magnet, vacuum cups or special tooling
Power required: 230 V/400 V
Air required: 6 bar
Ask for a quote
Are you interested in a free quotation on one of our Ergobalancer®? Write your conact info below and we will reach out to you.
